- Home
- Areas We Serve
- Lyman
Nearby community
Lyman, SC Plumber: How Permits Work Through CC&I, and What to Fix First
In Lyman, plumbing permits are not a counter in town hall: the town sends applicants to CC&I, a separate permitting office. Greer SC Plumbing Experts lays out that path and handles the plumbing that comes before it.

How a plumbing permit moves through Lyman
The Town of Lyman says that since September 1, 2021 it works with CC&I on all permitting. The town's zoning side handles local approvals, and then the applicant contacts CC&I to finish the permit.
- Contact Lyman's Planning and Zoning Administrator for town forms and approvals, at (864) 978-3490 or (864) 439-0680.
- The town forwards its approvals to CC&I.
- Contact CC&I yourself to complete the permit, at (864) 586-6111, 4795 S. Church Street Ext., Suite 2, Roebuck.
- Submit applications through the online Citizen Portal, which the town advises using in Google Chrome.
- Keep the permit number, because the inspector will need it.
Source: Town of Lyman: construction permitting
The town page also quotes state code, which says the owner must first apply to the building official and obtain the required permit before work on a plumbing system. Whether a given repair needs one is a question for CC&I, so ask before the work starts.

Talk to us before you start a Lyman plumbing job
Tell us the address and the work. We will explain what to ask CC&I and what the plumbing side involves.
A toilet that runs, rocks or leaks at the base
A running toilet adds up on the water bill, and a rocking one is a sign the seal is failing. The cause is a few parts, and the repair is usually the same visit.

- Run food coloring in the tank for fifteen minutes to test the flapper.
- Check the base for damp flooring after a flush.
- Replace worn fill valves and flappers before they fail.
- Call if the floor around the toilet feels soft.
The page on fixing running and leaking toilets covers the repair choices in more detail.
Slow drains and kitchen backups
A kitchen sink that drains slowly, then backs up into the other bowl, is usually grease past the disposal. A hand auger helps a single fixture, but a repeat clog calls for a line cleaning.
Read garbage disposal problems if the sink empties through a disposal, and jetting out a stubborn line when the clog keeps returning.
| Symptom | Likely cause | Usual fix |
|---|---|---|
| Slow kitchen sink | Grease buildup in the line | Auger, then jet if it recurs |
| Backs up into the other bowl | Clog past the disposal | Clear the drain line |
| Gurgling in several drains | Main line partly blocked | Camera the line |
| Sewage at a floor drain | Main line or public main | Stop water use and call |
Licensing and what to ask for
State law requires a license for residential plumbing work over five hundred dollars. Ask for the plumber's license details, and ask who is pulling the permit and with which office.
What to have ready before you call CC&I
- The street address and the owner's name
- A plain description of the work, such as replacing a tank water heater with a tank water heater
- The plumber's company name and license details
- Whether the job moves any pipe or only swaps a fixture
- A rough sketch if pipes are being rerouted
Having these in hand turns a long first call into a short one. The permit office can then say plainly whether the work needs a permit and what the inspection will check.
Lyman plumbing problems that can wait and ones that cannot
| Problem | Reasonable to wait? | What to do now |
|---|---|---|
| Slow bathroom sink | Yes | Try a plunger or a hand auger |
| Toilet runs on and off | Briefly | Test the flapper with food coloring |
| Water running from a pipe | No | Close the main valve and call |
| Several drains backing up | No | Stop using water and call |
| Hot water gone | Soon | Check the breaker or the pilot |
Water heaters: the repair or replace question
A heater that leaks from the tank body is finished. One that leaks from a fitting or does not heat can often be repaired. Choosing a replacement heater explains sizing and what to ask your plumber about permits, which in Lyman go through CC&I.
Street-side problems belong to the utility
A low-pressure complaint across the whole house, a main that sounds loud or water on the street are usually on the utility's side of the meter. Your bill names the utility, and the first call about anything outside your property line goes there.
- Ask whether neighbors have the same problem.
- Note when the pressure drops and for how long.
- Check the meter and the shutoff before you call.
- Ask the utility where its responsibility ends at your address.
Once you know the problem is inside the house, a plumber can take over with confidence. Tell the plumber what the utility said, because it saves a repeat trip and keeps you from paying for work on a pipe that is not yours.
Where Lyman sits on the map
Lyman is east of Greer in Spartanburg County. The map shows the town, and a call with your street address lets us confirm it.
Lyman plumbing questions
Who processes plumbing permits in Lyman?
The Town of Lyman says it works with CC&I on all permitting. Start with the town's Planning and Zoning Administrator, then contact CC&I at (864) 586-6111 to finish the permit.
How do I apply for a permit in Lyman?
Applications go through the online Citizen Portal. The town's page advises using Google Chrome. The zoning side forwards its approvals to CC&I, and you complete the process with CC&I.
Does state law require a permit for plumbing work?
The town's page quotes state code, which says the owner must first apply to the building official and obtain the required permit. Ask CC&I whether your repair needs one.
What do I do when a drain backs up?
Stop running water and see whether more than one drain is affected. A single slow fixture can be augered, while several gurgling drains point to the main line.